Hot
MORVELLE™ Glass Patio Cover & Veranda 8.8mm Laminated Glass
From £5,800.00 (inc. VAT)
Victorian Styled Glass Roof Verandas
From £3,408.00 (inc. VAT)
SNAPA PVC Snap Down Wall Side Glazing Bar
From £50.21 (inc. VAT)
The Snapa glazing bar works well with 10mm, 16mm, 25mm, 32mm and 35mm Axiome® multiwall or other polycarbonate sheets. Whilst Snapa bars are ideal for smaller DIY type projects, where greater longevity of strength are required, Alukap®-XR glazing bars are recommended.
Qualities:
- Quick snap fix fitting
- Installer friendly
- Easy to cut
- Economical solution
Common Uses:
- Canopies
- Covered Decking Areas
- Carports
- Verandas
- Covered walkways
- DIY
| Colour |
White |
|---|---|
| Length |
2.0m ,2.5m ,3.0m ,4.0m ,5.0m ,6.0m |
Description
The Snapa Rafter Wall Side Glazing Bar is extruded as a low cost budget glazing bar.
The Snapa glazing bar works well with 10mm, 16mm and 25mm Axiome® multiwall or other polycarbonate sheet.
Whilst Snapa bars are ideal for smaller DIY type projects, where greater longevity of strength are required, Alukap®-XR glazing bars are recommended.
Price includes 1 end cap.
Related products
Self Supporting Wall Plate
From £193.71 (inc. VAT)
Select options
This product has multiple variants. The options may be chosen on the product page
CAPEX 70 Concealed Fix Hip Glazing Bar
From £187.06 (inc. VAT)
Select options
This product has multiple variants. The options may be chosen on the product page
The CAPEX 70 hip glazing bar with concealed fixings is for roof pitches between 15 degrees to 50 degrees. To upgrade to an aluminium extended end cap - click here.
It's versatility means that it can be installed in either wet or dry conditions without compromising costs.
The CAPEX 70 hip bar is ideal for:
- conservatories
- skylights
- glazed walkways
- shopping centres
- swimming pools
- railway stations
- bus stations
CAPEX 50 Concealed Fix Wall End Glazing Bar
From £133.83 (inc. VAT)
Select options
This product has multiple variants. The options may be chosen on the product page
At 50mm wide, the CAPEX 50 concealed fixings rafter supported glazing bar is used to cap single, double or even triple glazed glass. It can also be used for acrylic, structured polycarbonate or solid polycarbonate. It also includes a high quality EPDM gasket and aluminium end cap which helps to keep the glazing in place.
It's versatility means that it can be installed in either wet or dry conditions without compromising costs.
The CAPEX 50 is ideal for:
- conservatories
- skylights
- glazed walkways
- shopping centres
- swimming pools
- railway stations
- bus stations
Aluminium Heavy Duty Self Supporting Glazing Bar
From £132.83 (inc. VAT)
Select options
This product has multiple variants. The options may be chosen on the product page
P288 HEAVY DUTY SELF SUPPORTING GLAZING BAR FOR GLASS at 24MM & POLYCARBONATE SHEET AT 25MM
The P288 structural glazing bar system is a heavy duty two-part, 60mm wide medium span system designed for installing both multiwall and solid polycarbonate as well as glass. When installing glass units, you can span up to 2.6m with 600 centres. When installing up to 25mm multiwall polycarbonate sheet, you can span up to 4m with 1250mm centres. The P288 glazing bar system consists of a 60mm wide aluminium base bar complete with flat gaskets, a PVCu underclad that clips on to the base bar and a 60mm wide screw-on aluminium capping bar complete with flat gaskets. Please note that this glazing bar system does not include a mechanical end plate. The base bar should be fixed to its supports top, (middle and) bottom, the glazing faced up and the capping bar screwed on at intervals of no more than 400mm. Each bar should be finished by fitting an aluminium mechanical end plate. This glazing bar system is stocked as individual packs in white & anthracite grey (RAL7016) in a range of lengths. Additional individual end plates are also available separately. If you are unsure on any of the above, please call us on 01942 871183.
Twinfix P320 Rafter Glazing Bar
From £61.61 (inc. VAT)
Select options
This product has multiple variants. The options may be chosen on the product page
With a width of 60mm, the Twinfix P320 rafter supported glazing bar is designed to hide the fixings when fitting to rafters.
The P320 rafter glazing bar comes with 60mm wide rubber rafter gasket which is attached to the rafter using galvanised nails (not supplied by us) at every 300mm along the length. The bar also comes with a screw down aluminium glazing cap which has a hidden fixing channel and bubble gaskets. There's also an aluminium top cap which pushes down thus hiding the screw fixings. A polycarbonate end plate finishes off each bar.
The P320 rafter glazing bar is the best when it comes to glazing either multiwall polycarbonate sheet, solid polycarbonate AND glass - up to 24mm thick. We recommend replacing the end plates with one of our mechanical end plates when installing glass. You will need to contact your glass supplier for recommended rafter sizes and tolerances.
This glazing bar system is stocked as individual packs in white, brown & anthracite grey (RAL7016) in either 3m or 4m lengths.
Additional individual end plates are also available separately.
CAPEX 70 Concealed Fix Glazing Bar
From £58.15 (inc. VAT)
Select options
This product has multiple variants. The options may be chosen on the product page
At 70mm wide, the CAPEX 70 concealed fixings rafter supported glazing bar is used to cap single, double or even triple glazed glass. It can also be used for acrylic, structured polycarbonate or solid polycarbonate. It also includes a high quality EPDM gasket and aluminium end cap which helps to keep the glazing in place. To upgrade to an aluminium end cap - click here.
It's versatility means that it can be installed in either wet or dry conditions without compromising costs.
The CAPEX 70 is ideal for:
- conservatories
- skylights
- glazed walkways
- shopping centres
- swimming pools
- railway stations
- bus stations
CAPEX 50 Extended End Caps
£23.57 (inc. VAT)
Select options
This product has multiple variants. The options may be chosen on the product page
Where an extended reach is needed when the rafter gaskets could be visible due to them extending into the guttering, The CAPEX extended end cap is ideal for providing a neat and secure finish.
The extended end cap replaces the standard end cap which comes FREE with every CAPEX bar in the range.
- Decorative motif finish
- A push fit onto the end of Capex 70 Cover Cap Glazing Bar
- Replaces the standard end cap
- Provides a neat finish for the gutter where an extended reach is needed
- Material: Aluminium
Exitex Capex PVC Snap Down Glazing Bar
From £21.29 (inc. VAT)
Select options
This product has multiple variants. The options may be chosen on the product page
Rafter supported snap down top cap glazing bars are the perfect solution for providing a secure weather tight glazing option for 10mm, 16mm & 25mm multiwall polycarbonate sheets. Ideal for use on timber conservatories, lean to roofs, carports, pergolas and many more. Don't forget to buy you glazing bar end caps - available here