Twinfix P320 Rafter Glazing Bar
From £61.61 (inc. VAT)
With a width of 60mm, the Twinfix P320 rafter supported glazing bar is designed to hide the fixings when fitting to rafters.
The P320 rafter glazing bar comes with 60mm wide rubber rafter gasket which is attached to the rafter using galvanised nails (not supplied by us) at every 300mm along the length. The bar also comes with a screw down aluminium glazing cap which has a hidden fixing channel and bubble gaskets. There’s also an aluminium top cap which pushes down thus hiding the screw fixings. A polycarbonate end plate finishes off each bar.
The P320 rafter glazing bar is the best when it comes to glazing either multiwall polycarbonate sheet, solid polycarbonate AND glass – up to 24mm thick. We recommend replacing the end plates with one of our mechanical end plates when installing glass. You will need to contact your glass supplier for recommended rafter sizes and tolerances.
This glazing bar system is stocked as individual packs in white, brown & anthracite grey (RAL7016) in either 3m or 4m lengths.
Additional individual end plates are also available separately.
| Colour |
White ,Brown ,Anthracite Grey |
|---|---|
| Length |
3.0m ,4.0m |
With a width of 60mm, the Twinfix P320 rafter supported glazing bar is designed to hide the fixings when fitting to rafters.
The P320 rafter glazing bar comes with 60mm wide rubber rafter gasket which is attached to the rafter using galvanised nails (not supplied by us) at every 300mm along the length. The bar also comes with a screw down aluminium glazing cap which has a hidden fixing channel and bubble gaskets. There’s also an aluminium top cap which pushes down thus hiding the screw fixings. A polycarbonate end plate finishes off each bar.
The P320 rafter glazing bar is the best when it comes to glazing either multiwall polycarbonate sheet, solid polycarbonate AND glass – up to 24mm thick. We recommend replacing the end plates with one of our mechanical end plates when installing glass. You will need to contact your glass supplier for recommended rafter sizes and tolerances.
This glazing bar system is stocked as individual packs in white, brown & anthracite grey (RAL7016) in either 3m or 4m lengths.
Additional individual end plates are also available separately.
Related products
Self Supporting Wall Plate
CAPEX 70 Concealed Fix Hip Glazing Bar
- conservatories
- skylights
- glazed walkways
- shopping centres
- swimming pools
- railway stations
- bus stations
Aluminium Heavy Duty Self Supporting Glazing Bar
P288 HEAVY DUTY SELF SUPPORTING GLAZING BAR FOR GLASS at 24MM & POLYCARBONATE SHEET AT 25MM
The P288 structural glazing bar system is a heavy duty two-part, 60mm wide medium span system designed for installing both multiwall and solid polycarbonate as well as glass. When installing glass units, you can span up to 2.6m with 600 centres. When installing up to 25mm multiwall polycarbonate sheet, you can span up to 4m with 1250mm centres. The P288 glazing bar system consists of a 60mm wide aluminium base bar complete with flat gaskets, a PVCu underclad that clips on to the base bar and a 60mm wide screw-on aluminium capping bar complete with flat gaskets. Please note that this glazing bar system does not include a mechanical end plate. The base bar should be fixed to its supports top, (middle and) bottom, the glazing faced up and the capping bar screwed on at intervals of no more than 400mm. Each bar should be finished by fitting an aluminium mechanical end plate. This glazing bar system is stocked as individual packs in white & anthracite grey (RAL7016) in a range of lengths. Additional individual end plates are also available separately. If you are unsure on any of the above, please call us on 01942 871183.
Twinfix P227 Aluminium Glazing Bar
Aluminium Capped Screw Down Glazing Bar 50mm
- Includes a 50mm Rafter Main Bar Top Cap with a detachable cover cap to conceal and protect fixings.
- Features an integrated High Side EPDM Rubber Gasket for a watertight seal on the top side of the glazing.
- Comes with a separate EPDM Base Gasket (with a removable central pip) that serves as a seat and seal on the underside of the glazing, attaching to the timber rafter.
- Does not include the aluminium end cap - click here.
- Versatile Glazing: Compatible with glass or polycarbonate of any thickness.
- High-Quality Sealing: High Side EPDM Gaskets provide a weatherproof seal.
- Durable Base Gasket: Acts as a secure seat and seal for glazing.
- Adaptable Design: Removable central pip accommodates grooved or non-grooved rafters.
- Strong & Lightweight: Made from premium aluminium extrusion.
- Durable Finish: Powder-coating ensures a consistent, long-lasting finish.
- Flexible System: Fits a variety of roof designs and sizes.
- Fully Serviceable: Easy to remove Sunwood components when needed.
- Maintenance-Free: No annual painting required.
- Seamless Integration: Designed to fit perfectly with other Sunwood products.
- Easy Installation: Simplified installation process.
- 5-Year Guarantee: Enjoy peace of mind with a long product guarantee.
Exitex Capex PVC Snap Down Glazing Bar
CAPEX 70 Extended End Caps
- Decorative motif finish
- A push fit onto the end of Capex 70 Cover Cap Glazing Bar
- Replaces the standard end cap
- Provides a neat finish for the gutter where an extended reach is needed
- Material: Aluminium
